Welcome to the Customer Community
Power Community. Support. Knowledge Base. All in One Place.
Recent Webinars
webinars
DNP3 Basics | Points and Data | Object Types | Polling Schemes | Protocol Layers | Configuration
webinars
Plataforma Orion | Nuevo Hardware | Nuevo Software | Nuevos Protocolos
webinars
Orion Redundancy and Cascading | Redundancy Diagrammed (IEDs and HMI/SCADA) | Live Demos | Cascading Diagrammed
Latest Software
Orion Getting Started
video
This video shows how to enable the SQL database used by the AAR (Archive Alarm Retentive) module. This applies to all Orion platforms.
video
This video shows how Orions can be cascaded. Cascading is available on all Orion platforms.
article
The quality in which videos available on this website are rendered depends on the quality setting in your viewer. This article shows how to set the quality to 1080p / HD in order to achieve best viewing quality. This does not affect the audio quality
video
The Orion supports default or template configurations for IEDs. Over 600 are provided in the standard installation of NCD. Additional template files can be created in NCD if needed and as explained by this video.
article
The executable files posted in the Power Community are made available as .zip files and the SHA-256 hash for each .zip file is posted alongside in the same article/webpage. This article describes the process for hash verification and suggests two pro
article
The Linux interface names may differ from the port labels on the Orion enclosures. The tables in this article show the mapping between these names for all Orion models. This is useful when using Linux commands in the Orion console or when using Wires
article
The drivers and utilties below support USB communication between PC and Orion and backup/restoration of Orion databases.
video
This video shows how to reset the Orion to factory settings or, in other words, wipe the user data. All user data will be erased. Note: The Orion license file orion.ntk will also be erased. Download it from the Orion prior to the reset for subsequent
Bitronics Articles
article
Optimal Resolution associates some predefined “Full Scale” analog input with the maximum possible DNP3 integer (32,767 counts). Then the resolution available from the transducer is +/- 1 count in 32,767. As long as the definition of the analog full‐s
article
Calculation of the settings required to configure a 50 or 60 series meter so its power and energy measurements represent the power and energy at some point of delivery, other than the location where the meter is actually connected, compensating for l
article
This article explains the installation of a wiring comb on the 50 and 60 series Bitronics meters and transducers. Please download the article on the right side.
article
NovaTech offers complete packaged solutions for pole top mounting to support distribution automation applications and distribution grid monitoring.
article